Micro HPLC Columns. For research use only. Not for use in diagnostic procedures. ChromXP columns optimize performance, ease of use, and reliability of the SCIEX M3 MicroLC, MicroLC 200 Plus and NanoLC 400 systems. ChromXP columns ensure optimum separation and long term stability. Features-at-a-glance
Volume II Test Methods and Speclflcatlons
Clear glass or polypropylene inserts for 9mm HPLC and GC autosampler vials are available in a variety of configurations with usable volumes from 160μL to 3.5mL. Pulled point inserts are an economical choice for noncritical applications; Nominal O.D. of 6mm to fit Target wide-opening vials; For use with: Target LoVial Wide-Opening vials
HPLC Column, VertiSepTM BIO, Gaurd Cartidge, Gaurd Cartidge, VERTICAL CHROMATOGRAPHY,Ultra-high purity spherical silica offer excellent, stability, efficiency and column-to-column reproducibilty, Ultra-high surface area offer ultra high resolution, for gradient elution of diffculty separation, compounds, High carbon loading C18 offers the high degree of hydrophobicity, Fully endcapped to
HPLC Solvent Reservoir Cap with Teflon insert for HPLC Solvent Reservoir Bottle. Specify 1/8" or 1/16" OD tubing.Fits our 0.5, 1, 2 and 5L reservoirs (GL 45). Pack of 6, made in Japan.
Dec 20, 2007 · HPLC amber vials (wide opening screw top amber vials with write-on spot; Aijiren, cat. no. ) Inserts for HPLC vials (100-μl deactivated glass inserts with polymer feet and mandrel
Waters offers a wide array of column choices and formats, including but not limited to HPLC, UPLC, UHPLC, GPC, SFC, and SEC. Select the ideal column for your application, and simplify your methods development, validation, and transfer throughout your organization.
Enjoy the range and capabilities of these state-of-the-art columns and gain confidence in the accuracy and quality of your analytical data. The Thermo Scientific Hypersil GOLD family of liquid chromatography (LC) columns is the culmination of 40 years of experience in the media and column product development and manufacturing.
This can be found on classic Capillary (inlet) and Micro (inlet and outlet) columns. • Insert the PEEK or PEEKsil inlet in the fingertight. • Tighten while ensuring no dead volume occurs. Column inlet Open fused silica • Insert the PEEKTM sleeve (supplied with the column) with the nut and the ferrule in a valve port or union.
standard expanding mandrel sleeves The standard length sleeves & flush type sleeves can be used with all types of mandrels, & are interchangeable within the diameter range of each type. Sleeves can be supplied bonded, to keep swarf away from the double angle form, to help prolong the sleeves life and accuracy.
Jan 15, 2003 · Fig. 3 shows representative chromatograms obtained with standard-size HPLC and corresponding micro-HPLC and highlights one of the advantages of micro-HPLC, namely the pronounced reduction in the required sample amount. Although the micro-HPLC detector that had a detection cell volume by a factor of 26 smaller but same optical path length has a
1-4mL Autosampler Vials for HPLC, UPLC, GC 1.5mL 8-425 Screw Neck Vial ND8 1.5mL 9mm Short Thread Vial ND9 1.5mL 10-425 Screw Neck Vial ND10 1.5mL 11mm Snap Ring Vial ND11 1.5mL 11mm Crimp Ring Vial ND11 4mL 13-425 Screw Neck Vial ND13 1mL Shell Vial Micro-Inserts Vial Racks Hand Crimper, Decrimper
Crawford Scientific supply capillary and microbore columns from leading manufacturers such as Aijiren and YMC. These columns are ideal for very sample-limited applications because they provide enhanced sensitivity by reducing on-column sample dilution.
Polymers Since Week 197804, monomers in titles which refer to a polymer rather than the monomer itself have been converted to the poly form if the term is in the list of Title Terms. For example, polyacrolein can be present in a title as ‘polyacrolein’ or ‘acrolein polymer’.
Semi-crystalline Polymer A polymer characterized by areas of order in which molecular chains line up. Semi-crystalline materials tend to have good chemical resistance but higher shrink than amorphous materials. Sink A depression in a molded plastic part caused by a thicker section of plastic shrinking and collapsing as it cools.
