News
Position :
Home » News » 2ml hplc vials insert » Free sample hplc insert with mandrel interior and polymer feet for lab use Alibaba
Micro-Inserts
Micro-Inserts
Micro-Inserts
Micro-Inserts
Micro-Inserts
Micro-Inserts

Free sample hplc insert with mandrel interior and polymer feet for lab use Alibaba

Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials Material: Glass for Insert, Polymer for feet Dimensions: 5x29mm,5x31mm/5.7x29mm,5.7x31mm Capacity: 150-250uL Qty/Pack: 100pcs/pack Payment: T/T MOQ: 1 pack

Inserts - Vials | Sigma-Aldrich

All conical styles of inserts are offered with the traditional pulled point as well as the improved mandrel point. Pulled point inserts are more economical, but mandrel point inserts provide a more pointed and uniform tip that enables better sample recovery.

HPLC Determination of Free Acrylic Acid and Monomers in

polymers. High Performance Liquid Chromatography (HPLC) is the techique of choice to measure free acrylic monomers in polymers before cross-linking. Typically, sample preparation to extract a variety of residual monomers from the polymer matrix is complex, tedious and time-consuming2,3,4. If the extract contains both polar and non-polar monomers

Characterization of Pharmaceutical Polymers by HPLC and GPC

May 23, 2011 · Figure 2. Chromatogram of a polymer under investigation. This separation is based on a slight difference in hydrophobicity between the mono and difunctional species. Figure 2 shows the chromatogram of a polymer under investigation. In this case, the minor component is not detected, illustrating that this HPLC technique can be used

Others - Zhejiang Aijiren Technology, Inc. - page 1.

Sample Available Visit My Factory Chromatography Vials, PTFE/Silicone Septa, HPLC Vials manufacturer / supplier in China, offering 11mm Crimper for 11mm Crimp Caps Seals Ajrd11-W (Economy TYPE), 11mm Crimper for 11mm Crimp Caps Seals Ajrc11-W (Economy TYPE), 11mm Crimper for 11mm Crimp Caps Seals Ajrc11-II (Aijiren TYPE) and so on.

Detection of 2-hydroxyethidium in cellular systems: a unique

Dec 20, 2007 · Inserts for HPLC vials (100-μl deactivated glass inserts with polymer feet and mandrel interior; Aijiren, cat. no. ) Inject 20 μl of sample into the HPLC system with an ether-linked ...

1.5ml Laboratory Sample Crimp Vials Nd11 - alibaba.com

1.5ml Laboratory Sample Crimp Vials Nd11 , Find Complete Details about 1.5ml Laboratory Sample Crimp Vials Nd11,Sample Crimp Vials Nd11,Sample Crimp Vials Nd11,Sample Crimp Vials Nd11 from Laboratory Bottle Supplier or Manufacturer-Zhejiang Aijiren Technology Inc.

Aijiren Technologies Catalogue - Crawford Scientific Ltd.

glass flanged insert. Its polypropylene body has a glass flanged insert molded to the inside, so the sample comes in contact only with the 100 µL high quality glass insert and the septum. Use with crimp or snap caps. Polypropylene Vials. Vial Type Volume Certified 100/pk 1000/pk. Polypropylene, crimp/snap top 250 µL ] 5188-2788 9301-0978

SC15032-Coverslip Cell Chamber - Aireka Cells

The chamber is designed for live-cell microscopic imaging. With two coverslips in place, it forms a leakproof enclosed volume (≤2ml) to completely isolate/seal the sample from external environment. Hence it is perfect for hazardous samples or when sample evaporation needs to be minimised.

Supelco HPLC Calculator for Isocratic or Gradient Method

HPLC Method Transfer Calculator Calculates conditions for transfer of an isocratic or gradient method from one HPLC column to another. Allows method scaling from microbore through preparative column range.

Chemical Plant Equipment & Supplies Products, Manufacturers

V4091, 250ΜL INSERT, FOR 9MM VIAL 250uL Insert with mandrel interior and polymer feet, 29*5.7mm, for 9mm Vials, 100ea/pkg Quantity Available: Min Price: Category: Chemicals | Chemical Plant Equipment & Supplies

Amazon.com: Industrial & Scientific

Monoprice Maker Select 3D Printer v2 With Large Heated (200 x 200 x180 mm) Build Plate + Free Sample PLA Filament And MicroSD Card Preloaded With Printable 3D Models. Monoprice $329.99 $ 329 . 99

China 150UL Micro Insert Suit for 8-425 Vials - China 150UL

150uL Insert with mandrel interior and polymer feet, 29*5mm; suits for ND8 Vials. Glass inserts with polymer feet. Conical with precision-formed mandrel interior, 150 μl . Replaces for Shimadzu Inserts, 150uL with bottom spring, used with ND8 2mL Shimadzu screw-thread vials . Product Description:

1.5mL 9mm Short Thread Vial ND9 for GC and HPLC

Micro-Insert, 31*6mm Clear, Flat Bottom, Suits for 9mm Vials: 250uL Conical Micro-Insert, 31*5.7mm, Suits for 9mm Vials: 250uL Micro-Insert with Mandrel Interior, & Polymer Feet, 29*5.7mm, Suits for 9mm Vials: 0.3mL Clear PP Short Screw Micro-Vial, 9mm Thread, 11.6*32mm

imChem Vials - Accueil | Swiss Labs

Recommended for HPLC usage. A handy and inexpensive vial/closure combination for uncritical analyses. Caps are made of high quality polypropylene to exact manufacturing tolerances and lined in a controlled manufacturing environment. KR150 - 150µl insert with mandrel interior & polymer feet. Suits for ND8 Vials. KR250 - 250µl with mandrel

1.5ml 8-425 Screw Neck Vial Autosampler Vial Micro-Inserts I250

China 1.5ml 8-425 Screw Neck Vial Autosampler Vial Micro-Inserts I250, Find details about China 8-425 Vial, HPLC Vial from 1.5ml 8-425 Screw Neck Vial Autosampler Vial Micro-Inserts I250 - Zhejiang Aijiren Technology, Inc.

Related Products
Inquiry
Zhejiang Aijiren Technology,Inc is a global supplier of analytical field and lab supplies with high quality, good service and favorable price.We have customers from pharmaceutical, life science, chemistry, technology, food processing industry and so on. Others like college, research institution, government, environment test institution, etc.
Copyright: 2023 Zhejiang Aijiren Technology, Inc. All rights reserved.