There are usually three types of Micro-inserts produced by Aijiren, 250uL Micro-insert with mandrel interior&polymer feet, the specification is 29*5.7mm, 250uL Conical Micro-insert, the specification is 31*5.7mm, 300uL Micro-insert, the specification is 31*6mm. Customers can choose from three specifications of Micro-insert according to the
250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, of 9mm Vials 5000 Boxes of 13-425 HPLC Vial sent to Singapore ... China Follow us ...
2.10-425 thread autosampler vial with matched PP Screw Seals ND10, PTFE/rubber septa & Micro-Insert. Features . 1) 10-425 screw Thread ND10 vials(11.6*32mm) for GC and HPLC. 2) Wide-opening vials provide an increased target area for easier sample preparation and to reduce the chance of bent or broken needles during sampling
300uL Micro-Insert, 31*6mm Clear, Flat Bottom, Suits for 9mm Vials: 250uL Conical Micro-Insert, 31*5.7mm, Suits for 9mm Vials: 250uL Micro-Insert with Mandrel Interior, & Polymer Feet, 29*5.7mm, Suits for 9mm Vials: 0.3mL Clear PP Short Screw Micro-Vial, 9mm Thread, 11.6*32mm: 0.3mL Amber PP Short Screw Micro-Vial, 9mm Thread, 11.6*32mm
Buy hplc insert with mandrel interior and polymer feet for hplc vials Alibaba Certified hplc insert conical with high quality India Autosampler Vials, Cap & Septa - chinasepta.en.alibaba.com
As a supplier of laboratory consumables for more than ten years, Aijiren provides various specifications and models of Syringe Filter to facilitate customers to filter various types of samples for chromatographic analysis.
300uL Micro-Insert, 31*6mm Clear, Flat Bottom, Suits for 11mm Crimp Vials: 250uL Conical Micro-Insert, 31*5.7mm, Suits for 11mm Crimp Vials: 250uL Micro-Insert with Mandrel Interior & Polymer Feet, 29*5.7mm, Suits for 11mm Crimp Vials
Quzhou Laibo Technology has a 250ul vials inserts, welcome for enquiry. IP250 250ul Insert with mandrel interior and polymer feet, 29*5.7mm; suits for ND9 Vials This is the end of the introduction of Who has the vials inserts of 250ul? .
China different shape micro insert with mandrel interior and polymer feet for sales Laboratory analytical hplc vials with inserts for sample vials Iso9001 0.3ml vial insert suit for screw top vials Professional micro insert with mandrel interior and polymer feet for sale
If the reagent to be tested by the customer is very precious and the capacity of 2ml vial is too large, Aijiren 8-425 2ml Autosampler Vials can be used with different types of micro-insert. There are 3 types of micro-insert, 29*5mm 150uL micro-insert with mandrel interior&polymer feet, 150uL conical bottom micro-insert and 250uL flat bottom
1. 1.5ml/2ml Short screw Thread ND9, wide opening, 9mm thread hplc vial with matched PP Screw caps ND9, PTFE/silicone septa & Micro-Insert 2. Short screw Thread ND9 vial is designed to ensure proper centering of limited volume inserts, eliminating missed injections.
Description. The HPLC HPLC Vials &gc vials and closures listed in our offer are designed, Micro Glass Insert constructed and manufactured for HPLC and LC / MS applications. In our catalog you will find hplc vials &gc vials for autosamplers of different volumes, from 0.1ml, Volume Glass Insert over 1.5ml vials & 2Ml Hplc Vials, 5m, 10ml to 20ml the vials compatible caps the vials septa.
Micro volume vial inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial. Micro volume vial inserts can be used with screw tops, crimp top, or snap top vials. All conical styles of inserts are offered with the traditional pulled point as well as the improved mandrel point. Pulled point inserts are more economical, but mandrel point inserts provide a more pointed
Maximum Recommended Description Fill Volume Fill Volume Unit Part No. Conical Inserts with Polymer Feet Glass inserts with polymer feet 320 µL 250 µL 100/pk * and mandrel interior Deactivated glass inserts with polymer feet 350 µL 250 µL 100/pk and mandrel interior Conical Glass Inserts Pulled-point glass inserts 350 µL
Glass Vial Inserts for ND9 Vial China Manufacturer. 150ul Insert with mandrel interior and polymer feet, 29*5mm; suits for ND8 Vials 250ul Insert with mandrel interior and polymer feet, 29*5.7mm; suits for ND9 Vials 200ul Micro-Insert,31*5mm,clear glass,flat bottom; suits for ND8 Vials 300ul Micro-Insert,31
