If the reagent to be tested by the customer is very precious and the capacity of 2ml vial is too large, 8-425 2ml Autosampler Vials can be used with different types of micro-insert. There are 3 types of micro-insert, 29*5mm 150uL micro-insert with mandrel interior&polymer feet, 150uL conical bottom micro-insert and 250uL flat bottom micro-insert.
Spiral Membrane Market by Polymer Type (Polyamide, PS & PES), Technology (RO, NF, UF, and MF), End-use Industry (Water & Wastewater Treatment, Food & Beverage, Pharmaceutical & Biotechnology, Oil & Gas), and Region - Global Forecast to 2023
1-4mL Autosampler Vials For HPLC、UPLC、GC 6-20mL GC HEADSPACE Vials 8-60mL EPA Storage Vials 16mm、25mm Micro-Insert with Mandrel Interior & Polymer Feet, 29*5mm;
CERMET Cermets CEROUS CERQUAD [1991] CERTIFY Certificate Certificates Certification Certified Certifying CERULEIN CERULENIN CERULOPLASMIN CERVIX Cervical CESIATED CESS CESSATION CESSPIT Cesspits CESTODE Cestodes CETANE CETANOL [1991] CETEARETH [1991] CETRAXATE [1991] CETYL CFAR [1991] CFEK [1991] CHABAZITE [1987] CHAETOMIUM CHAFE Chafer Chafers
Vitamin K also can be assayed by the use of high-performance liquid chromatography (HPLC) coupled with UV detection. Vitamin K1 content of food homogenates and plasma is analyzed using reverse-phase HPLC with postcolumn solidphase reduction of vitamin K1 to its hydroquinone form, followed by fluorometric detection.
Supelco′s new Low Adsorption (LA) vials are manufactured using a process that decreases the number of hydroxyl groups on the vial′s glass surface, significantly reducing surface activity while improving analytical quantitation and minimizing pH shifts in the sample. This same process also removes unwanted surface metals such as sodium and boron that can contaminate samples and interfere
0.25 Ml Micro-Inserts, 0.25 Ml Micro Inserts, Glass Micro-Inserts manufacturer / supplier in China, offering Inserts for 2ml Vials, 1.5ml 10-425 Vial Screw Neck HPLC Vial, 1.5ml 9mm Vial Screw Neck Sample Vial Caps B-Sc92291 and so on.
Suits for 9mm Vials: 250uL Conical Micro-Insert, 31*5.7mm, Suits for 9mm Vials: 250uL Micro-Insert with Mandrel Interior, & Polymer Feet, 29*5.7mm, Suits for 9mm Vials: 0.3mL Clear PP Short Screw Micro-Vial, 9mm Thread, 11.6*32mm
A1019/A1019M-01(2007) Standard Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains (Withdrawn 2012) A1020/A1020M-02(2012) Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications
Vials and closures listed in this section are designed, engineered and manufactured for optimum performance with HPLC and LC/MS applications.
A great deal of energy, money, and time can be spent on sample preparation. The last thing you need is for a sample vial to contribute to contamination resulting in complicated data interpretation or complete reanalysis. By using certified
749856 4/25/2016 3/8/2016 2659.35. 752733 4/29/2016 3/30/2016 58.5. 752733 4/29/2016 3/30/2016 340.3. 752733 4/29/2016 3/30/2016 23.92. 752733 4/29/2016 3/30/2016 371.6
Inserts are ideal for limited and micro volume applications. Options are available for both standard and wide opening 12x32 autosampler type vials. Clear borosilicate glass 60850 series has a conical point design, with polymer springs attached; residual volume 1mL 60855 series has a flat
In this configuration, it is equipped with the holder ror min. 54 vials of size 10 or 20 ml, sample incubation occurs in incubator with 6 vials under temperature range of 40-150°C - step 1°C, and with stirring. In the configuration for SPME, the injection uses the incubator that is used for headspace and the same numbers of vials.
They offer products like interior doors series 100, interior doors series 200, interior doors series 300, interior doors series 600, k brace doors, v groove wood doors, louvered doors, transoms, applied molding doors, Dutch doors, engraved and carved wood doors, etched glass, decorative glass, obscure glass, etc.
Conical Inserts with Polymer Feet. 150 μL glass inserts with polymer feet Conical Glass Inserts. 150 μL pulled-point interior glass inserts Flat Bottom Inserts. 250 μL glass flat bottom inserts. 56
