The system for growing 3D skin tissue models includes: A 24-well cell culture treated plate, preloaded with 4 μm pore size polycarbonate membrane inserts The proprietary 24-well carrier plate, designed to enable three different hanging height adjustments to accommodate required liquid-air interface culture and variable cell feeding protocols
6.5 mm Transwell® with 3.0 µm Pore Polyester Membrane Insert, Sterile 12 / Pk 48 / Cs Corning® $291.49: per case
A broad selection of membrane pore sizes, 0.4, 1.0, 3.0, and 8.0 µm diameter Packed in individual blister packs, 48 inserts/case Non-Tissue Culture-treated insert housings prevent promiscuous growth of cells on the insert walls Innovative hanging design facilitates pipetting and allows for co-culture Order Info
24-Well Inserts Pore Size 0.4 1 3 5 8 Membrane Optic Translucent Clear Navigation Order Information Accessory Features Supporting We're here to help with any filtration questions you might have so you can transform your ideas into reality, and tackle those big science problems. Quality Customer Service Is Our Number One Priority.
Features. Ease of use by convenient pipette access (patented design since 2011) Optimized gas exchange by product design. Compatible to standard well-plates. Industry leading quality standards to ensure membrane parameter consistency (important for consistent cell culture results) RNase/DNase Free and Non-pyrogenic.
Recommended Medium Insert Volume 0.5 mL Surface Treatment TC-Treated Sterile Yes Membrane Material Polyethylene terephthalate (PET) Membrane Pore Size 3 µm Nominal Pore Density 2x10⁶ pores per cm² Membrane Diameter 12 mm Lids Included Yes
3. Select a Format and Surface Treatment. Individual inserts are used with 6, 12, and 24 multiple well plates. A large, single-well format is also available in a 100mm dish. HTS insert plates are available in either 24 or 96 well formats with special receiver plates and single-well reservoirs to facilitate automation and ease of handling.
Transwell® cell culture inserts are convenient, easy to use permeable support devices for the study of both anchorage-dependent and anchorage-independent cell lines. They are designed to produce a cell culture environment that closely resembles the in vivo state.The membranes of insert plates and inserts are offered in various tissue treatments to attach and grow cells. Access and
A wide variety of configurations including 6, 12, and 24 well A broad selection of membrane pore sizes, 0.4, 1.0, 3.0, and 8.0 µm diameter Packed in individual blister packs, 48 inserts/case Non-Tissue Culture-treated insert housings prevent promiscuous growth of cells on the insert walls
Transwell cell culture inserts are easy-to-use permeable support devices for the study of both anchorage-dependent and anchorage-independent cell lines. 6.5 mm microplates have either a 0.1, 0.4, 3.0 or 5.0 µm pore polycarbonate insert and are packaged 12 inserts in a 24 well plate with Compare this item 12 mm Transwell Collagen-Coated Inserts
Polycarbonate Transwell inserts feature thin, translucent membranes available in four pore sizes ranging from 0.4 µm to 8.0 µm. Most are treated for optimal cell attachment. They are supplied sterile and come preloaded in multiple well plates or dishes. The polycarbonate membrane is compatible with most organic fixatives and stains.
The tissue culture treated polycarbonate membrane is available in either 0.4 µm or 3.0 µm pore sizes. The tissue culture treated polyester membrane is available in 0.4 µm pore size. Both membrane types provide an excellent substrate for cell attachment, growth, and differentiation.
Corning 24mm Transwell with 3.0um Pore Polyester Membrane Insert, Lids Included, Growth Surface Area 4.67 cm2 , TC Treated, Sterile, 6 per Pack, 24 per Case. This product is Non Returnable. IMPORTANT LINKS Home About us Products Specials What's new Sample request Pdf library Careers Contact us INDUSTRIES Universities Biotechnology
3 μm pore size is appropriate for leukocyte or lymphocyte migration. 5 µm pore size is appropriate for a subset of fibroblast cells or cancer cells such as NIH-3T3 and MDA-MAB 231 cells. Also suitable for monocytes and macrophages. 8 μm pore size is appropriate for most cell types.
3.0um pore size polyester micro insert Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials Material: Glass for Insert, Polymer for feet Dimensions: 5x29mm,5x31mm/5.7x29mm,5.7x31mm Capacity: 150-250uL Qty/Pack: 100pcs/pack Payment: T/T MOQ: 1 pack
Corning 24mm Transwell with 3.0um Pore Polyester Membrane Insert, Lids Included, Growth Surface Area 4.67 cm2 , TC Treated, Sterile, 6 per Pack, 24 per Case. This product is Non Returnable. IMPORTANT LINKS Home About us Products Specials What's new Sample request Pdf library Careers Contact us INDUSTRIES Universities Biotechnology
Polyester (PETE) Membrane Filters, 3.0 Micron, 25mm, 100/Pk PETE Membrane Filter Applications Precise General Filtration and Prefiltration Removal of red blood cells from plasma Flow control of reagents through assay PETE Membrane Filter Specifications General Performance by Pore Size a * Notes: a. Tolerance + 0%, -20% b. Tolerance +/-15%
3 μm pore size is appropriate for leukocyte or lymphocyte migration. 5 µm pore size is appropriate for a subset of fibroblast cells or cancer cells such as NIH-3T3 and MDA-MAB 231 cells. Also suitable for monocytes and macrophages. 8 μm pore size is appropriate for most cell types.
A broad selection of membrane pore sizes, 0.4, 1.0, 3.0, and 8.0 µm diameter Packed in individual blister packs, 48 inserts/case Non-Tissue Culture-treated insert housings prevent promiscuous growth of cells on the insert walls Innovative hanging design facilitates pipetting and allows for co-culture Order Info
3. Select a Format and Surface Treatment. Individual inserts are used with 6, 12, and 24 multiple well plates. A large, single-well format is also available in a 100mm dish. HTS insert plates are available in either 24 or 96 well formats with special receiver plates and single-well reservoirs to facilitate automation and ease of handling.
3.0um pore size polyester micro insert Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials Material: Glass for Insert, Polymer for feet Dimensions: 5x29mm,5x31mm/5.7x29mm,5.7x31mm Capacity: 150-250uL Qty/Pack: 100pcs/pack Payment: T/T MOQ: 1 pack
A wide variety of configurations including 6, 12, and 24 well A broad selection of membrane pore sizes, 0.4, 1.0, 3.0, and 8.0 µm diameter Packed in individual blister packs, 48 inserts/case Non-Tissue Culture-treated insert housings prevent promiscuous growth of cells on the insert walls
Recommended Medium Insert Volume 0.5 mL Surface Treatment TC-Treated Sterile Yes Membrane Material Polyethylene terephthalate (PET) Membrane Pore Size 3 µm Nominal Pore Density 2x10⁶ pores per cm² Membrane Diameter 12 mm Lids Included Yes
Transwell cell culture inserts are easy-to-use permeable support devices for the study of both anchorage-dependent and anchorage-independent cell lines. 6.5 mm microplates have either a 0.1, 0.4, 3.0 or 5.0 µm pore polycarbonate insert and are packaged 12 inserts in a 24 well plate with Compare this item 12 mm Transwell Collagen-Coated Inserts
Transwell® cell culture inserts are convenient, easy to use permeable support devices for the study of both anchorage-dependent and anchorage-independent cell lines. They are designed to produce a cell culture environment that closely resembles the in vivo state.The membranes of insert plates and inserts are offered in various tissue treatments to attach and grow cells. Access and
24-Well Inserts Pore Size 0.4 1 3 5 8 Membrane Optic Translucent Clear Navigation Order Information Accessory Features Supporting We're here to help with any filtration questions you might have so you can transform your ideas into reality, and tackle those big science problems. Quality Customer Service Is Our Number One Priority.
Polycarbonate Transwell inserts feature thin, translucent membranes available in four pore sizes ranging from 0.4 µm to 8.0 µm. Most are treated for optimal cell attachment. They are supplied sterile and come preloaded in multiple well plates or dishes. The polycarbonate membrane is compatible with most organic fixatives and stains.
The tissue culture treated polycarbonate membrane is available in either 0.4 µm or 3.0 µm pore sizes. The tissue culture treated polyester membrane is available in 0.4 µm pore size. Both membrane types provide an excellent substrate for cell attachment, growth, and differentiation.
Features. Ease of use by convenient pipette access (patented design since 2011) Optimized gas exchange by product design. Compatible to standard well-plates. Industry leading quality standards to ensure membrane parameter consistency (important for consistent cell culture results) RNase/DNase Free and Non-pyrogenic.
Recommended Medium Insert Volume 0.1 mL Surface Treatment TC-Treated Sterile Yes Membrane Material Polycarbonate Membrane Pore Size 3 µm Nominal Pore Density 2x10⁶ pores per cm² Membrane Diameter 6.5 mm Lids Included Yes Packaging Format 12 Inserts/Plate/Pk, 4 Plates/Cs
Corning 24mm Transwell with 3.0um Pore Polyester Membrane Insert, Lids Included, Growth Surface Area 4.67 cm2 , TC Treated, Sterile, 6 per Pack, 24 per Case. This product is Non Returnable. IMPORTANT LINKS Home About us Products Specials What's new Sample request Pdf library Careers Contact us INDUSTRIES Universities Biotechnology
3 μm pore size is appropriate for leukocyte or lymphocyte migration. 5 µm pore size is appropriate for a subset of fibroblast cells or cancer cells such as NIH-3T3 and MDA-MAB 231 cells. Also suitable for monocytes and macrophages. 8 μm pore size is appropriate for most cell types.
A broad selection of membrane pore sizes, 0.4, 1.0, 3.0, and 8.0 µm diameter; Packed in individual blister packs, 48 inserts/case; Non-Tissue Culture-treated insert housings prevent promiscuous growth of cells on the insert walls; Innovative hanging design facilitates pipetting and allows for co-culture; Order Info
24-Well Inserts Pore Size 0.4 1 3 5 8 Membrane Optic Translucent Clear Navigation Order Information Accessory Features Supporting We're here to help with any filtration questions you might have so you can transform your ideas into reality, and tackle those big science problems. Quality Customer Service Is Our Number One Priority.
3.0um pore size polyester micro insert Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials Material: Glass for Insert, Polymer for feet Dimensions: 5x29mm,5x31mm/5.7x29mm,5.7x31mm Capacity: 150-250uL Qty/Pack: 100pcs/pack Payment: T/T MOQ: 1 pack
Recommended Medium Insert Volume 0.1 mL Surface Treatment TC-Treated Sterile Yes Membrane Material Polycarbonate Membrane Pore Size 3 µm Nominal Pore Density 2x10⁶ pores per cm² Membrane Diameter 6.5 mm Lids Included Yes Packaging Format 12 Inserts/Plate/Pk, 4 Plates/Cs
3. Select a Format and Surface Treatment. Individual inserts are used with 6, 12, and 24 multiple well plates. A large, single-well format is also available in a 100mm dish. HTS insert plates are available in either 24 or 96 well formats with special receiver plates and single-well reservoirs to facilitate automation and ease of handling.
24-well microplates with polyester membrane inserts are available with 0.4 µm or 3.0 µm pore sizes. Features include 10 µm thick transparent polyester membrane that has been sterilized by gamma radiation. There are 12 inserts in a 24 well plate with 4 plates per case. Compare this item Corning® BioCoat™ Fibrillar Collagen Cell Culture Inserts
6.5 mm Transwell® with 3.0 µm Pore Polyester Membrane Insert, Sterile 12 / Pk 48 / Cs Corning® $291.49: per case
Transwell® cell culture inserts are convenient, easy to use permeable support devices for the study of both anchorage-dependent and anchorage-independent cell lines. They are designed to produce a cell culture environment that closely resembles the in vivo state.The membranes of insert plates and inserts are offered in various tissue treatments to attach and grow cells. Access and
Features. Ease of use by convenient pipette access (patented design since 2011) Optimized gas exchange by product design. Compatible to standard well-plates. Industry leading quality standards to ensure membrane parameter consistency (important for consistent cell culture results) RNase/DNase Free and Non-pyrogenic.
A broad selection of membrane pore sizes, 0.4, 1.0, 3.0, and 8.0 µm diameter Packed in individual blister packs, 48 inserts/case Non-Tissue Culture-treated insert housings prevent promiscuous growth of cells on the insert walls Innovative hanging design facilitates pipetting and allows for co-culture Order Info
Recommended Medium Insert Volume 0.5 mL Surface Treatment TC-Treated Sterile Yes Membrane Material Polyethylene terephthalate (PET) Membrane Pore Size 3 µm Nominal Pore Density 2x10⁶ pores per cm² Membrane Diameter 12 mm Lids Included Yes
A wide variety of configurations including 6, 12, and 24 well A broad selection of membrane pore sizes, 0.4, 1.0, 3.0, and 8.0 µm diameter Packed in individual blister packs, 48 inserts/case Non-Tissue Culture-treated insert housings prevent promiscuous growth of cells on the insert walls
Polycarbonate Transwell inserts feature thin, translucent membranes available in four pore sizes ranging from 0.4 µm to 8.0 µm. Most are treated for optimal cell attachment. They are supplied sterile and come preloaded in multiple well plates or dishes. The polycarbonate membrane is compatible with most organic fixatives and stains.
Absolute pore size ratings typically refer to the largest pore size of a membrane and it is expected that all pores will be equal to or smaller than the absolute rating. For the polycarbonate track-etch (PCTE) and polyester track-etch (PETE) membrane filters, porosity is the percent of the total surface area occupied by the pores; it typically
Corning 24mm Transwell with 3.0um Pore Polyester Membrane Insert, Lids Included, Growth Surface Area 4.67 cm2 , TC Treated, Sterile, 6 per Pack, 24 per Case. This product is Non Returnable. IMPORTANT LINKS Home About us Products Specials What's new Sample request Pdf library Careers Contact us INDUSTRIES Universities Biotechnology
Price. $172.24. Unit Size. per case. Add to cart. Product Number. 3460. Product Name. 12 mm Transwell® with 0.4 µm Pore Polyester Membrane Insert, Sterile.
3.0um pore size polyester micro insert. Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials Material: Glass for Insert, Polymer for feet Dimensions: 5x29mm
ThinCert, TC Insert for 12W Plate, PET, 3.0uM Pore Size, 2x106 per sqcm Pore Density list price/quantity total $348.63 /CS (48/CS) $0.00 1176Q48 Mfr. No. 665638 Also known as: TCG-665638, EK-45638 Description ThinCert, TC Insert for 12W Plate, PET, 8.0uM Pore Size, 0.15x106 per sqcm Pore Density list price/quantity total $321.34 /CS (48/CS) $0.00
6.5mm Transwell with 3.0um Pore Polyester Membrane Insert Sterile Code: 3472 D2-53 * 6.5 mm membrane diameter are packaged 12 inserts in a 24 well plate, 4 plates per case
Recommended Medium Insert Volume 0.5 mL Surface Treatment TC-Treated Sterile Yes Membrane Material Polyethylene terephthalate (PET) Membrane Pore Size 3 µm Nominal Pore Density 2x10⁶ pores per cm² Membrane Diameter 12 mm Lids Included Yes
A wide variety of configurations including 6, 12, and 24 well A broad selection of membrane pore sizes, 0.4, 1.0, 3.0, and 8.0 µm diameter Packed in individual blister packs, 48 inserts/case Non-Tissue Culture-treated insert housings prevent promiscuous growth of cells on the insert walls
Features. Ease of use by convenient pipette access (patented design since 2011) Optimized gas exchange by product design. Compatible to standard well-plates. Industry leading quality standards to ensure membrane parameter consistency (important for consistent cell culture results) RNase/DNase Free and Non-pyrogenic.
The system for growing 3D skin tissue models includes: A 24-well cell culture treated plate, preloaded with 4 μm pore size polycarbonate membrane inserts The proprietary 24-well carrier plate, designed to enable three different hanging height adjustments to accommodate required liquid-air interface culture and variable cell feeding protocols
3.0um pore micro insert. Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials Material: Glass for Insert, Polymer for feet Dimensions: 5x29mm,5x31mm/5.7x29mm
The tissue culture treated polycarbonate membrane is available in either 0.4 µm or 3.0 µm pore sizes. The tissue culture treated polyester membrane is available in 0.4 µm pore size. Both membrane types provide an excellent substrate for cell attachment, growth, and differentiation.
The HTS Transwell-96 permeable support has an array of 96-wells with membrane inserts connected by a rigid, robotics-friendly tray that enables all 96 inserts to be handled as a single unit. Choice of either polyester (PET) membrane (0.4 µm, 1.0 µm, and 8.0 µm pore sizes) or polycarbonate (PC) membrane (0.4 µm, 3.0 µm, and 5.0 µm pore sizes)
A broad selection of membrane pore sizes, 0.4, 1.0, 3.0, and 8.0 µm diameter; Packed in individual blister packs, 48 inserts/case; Non-Tissue Culture-treated insert housings prevent promiscuous growth of cells on the insert walls; Innovative hanging design facilitates pipetting and allows for co-culture; Order Info
Select a Pore Size In general, smaller pore sizes (0.4 and 1.0 µm) are used for culturing cells, co-culture applications, and drug transport studies. Larger pore sizes (3.0 to 8.0 µm) are recommended for chemotaxis and angiogenesis applications. Please refer to the Applications guide below for more information. Application Cell Type Pore Size
0.4 µm or 3.0 µm pore sizes. The tissue culture treated polyester membrane is available in 0.4 µm pore size. Both membrane types provide an excellent substrate for cell attachment, growth, and differentiation. An open culture reservoir plate is used to reduce liquid handling during cell feeding (medium can be exchanged all at once).
3.0um pore size polyester micro insert Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials Material: Glass for Insert, Polymer for feet Dimensions: 5x29mm,5x31mm/5.7x29mm,5.7x31mm Capacity: 150-250uL Qty/Pack: 100pcs/pack Payment: T/T MOQ: 1 pack
A broad selection of membrane pore sizes, 0.4, 1.0, 3.0, and 8.0 µm diameter. Packed in individual blister packs, 48 inserts/case. Non-Tissue Culture-treated insert housings prevent promiscuous growth of cells on the insert walls. Innovative hanging design facilitates pipetting and allows for co-culture. This product (s) resides on a Fisher
Polyester (PETE) Membrane Filters, 3.0 Micron, 25mm, 100/Pk PETE Membrane Filter Applications Precise General Filtration and Prefiltration Removal of red blood cells from plasma Flow control of reagents through assay PETE Membrane Filter Specifications General Performance by Pore Size a * Notes: a. Tolerance + 0%, -20% b. Tolerance +/-15%
3.0um pore micro insert. Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials Material: Glass for Insert, Polymer for feet Dimensions: 5x29mm,5x31mm/5.7x29mm
Price. $311.38. Unit Size. per case. Add to cart. Product Number. 3462. Product Name. 12 mm Transwell® with 3.0 µm Pore Polyester Membrane Insert, Sterile.
Recommended Medium Insert Volume 0.1 mL Surface Treatment TC-Treated Sterile Yes Membrane Material Polycarbonate Membrane Pore Size 3 µm Nominal Pore Density 2x10⁶ pores per cm² Membrane Diameter 6.5 mm Lids Included Yes Packaging Format 12 Inserts/Plate/Pk, 4 Plates/Cs
The system for growing 3D skin tissue models includes: A 24-well cell culture treated plate, preloaded with 4 μm pore size polycarbonate membrane inserts The proprietary 24-well carrier plate, designed to enable three different hanging height adjustments to accommodate required liquid-air interface culture and variable cell feeding protocols
Recommended Medium Insert Volume 0.1 mL Surface Treatment TC-Treated Sterile Yes Membrane Material Polyethylene terephthalate (PET) Membrane Pore Size 3 µm Nominal Pore Density 2x10⁶ pores per cm² Membrane Diameter 6.5 mm Lids Included Yes Packaging Format
Selecting the correct pore size for experiments is also very important. The smaller pore size Transwell membranes (0.4 or 3.0 µm) are primarily used in drug transport studies. Cell invasion, chemotaxis, and motility studies are usually done in Transwell membranes with 3.0 µm or larger pores.
3. Select a Format and Surface Treatment. Individual inserts are used with 6, 12, and 24 multiple well plates. A large, single-well format is also available in a 100mm dish. HTS insert plates are available in either 24 or 96 well formats with special receiver plates and single-well reservoirs to facilitate automation and ease of handling.
A wide variety of configurations including 6, 12, and 24 well A broad selection of membrane pore sizes, 0.4, 1.0, 3.0, and 8.0 µm diameter Packed in individual blister packs, 48 inserts/case Non-Tissue Culture-treated insert housings prevent promiscuous growth of cells on the insert walls
Select a Pore Size In general, smaller pore sizes (0.4 and 1.0 µm) are used for culturing cells, co-culture applications, and drug transport studies. Larger pore sizes (3.0 to 8.0 µm) are recommended for chemotaxis and angiogenesis applications. Please refer to the Applications guide below for more information. Application Cell Type Pore Size
3.0um pore size polyester manufacturer. Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials Material: Glass for Insert, Polymer for feet Dimensions: 5x29mm
Sterilized by gamma radiation Two versions available HTS Transwell 24 well microplates feature a 0.4 µm pore polyester membrane and 6.5 mm inserts. 8600A44 is 12 HTS Transwell-24 units loaded trays. 8600A45 is two HTS Transwell-24 units loaded into two open reservoir trays and two individually
In general, smaller pore sizes (0.4 and 1.0 µm) are used for culturing cells, co-culture applications, and drug transport studies. Larger pore sizes (3.0 to 8.0 µm) are recommended for chemotaxis and angiogenesis applications. Please refer to the Applications guide below for more information. 3 How to Use this Guide (continued) 3. Select a Format
The system for growing 3D skin tissue models includes: A 24-well cell culture treated plate, preloaded with 4 μm pore size polycarbonate membrane inserts The proprietary 24-well carrier plate, designed to enable three different hanging height adjustments to accommodate required liquid-air interface culture and variable cell feeding protocols
Design a diversity of experiments using various pore sizes, membrane types, and coatings 10 µm transparent membrane Treated for optimal cell attachment Excellent visibility under phase contrast microscopy Supplied in multiple well plates Sterile Choose your specification Diameter 6.5 mm 12 mm 24 mm Pore Size 0.4 µm 3 µm 8 µm
May 13, 2022 · Insert 6-Well, Pre-loaded 24-Well, Pre-loaded 6-Well Inserts 12-Well Inserts 24-Well Inserts Pore Size 0.4 1 3 5 8 Membrane Optic Translucent Clear Accessory Showing 1 to 3 of 3 entries Features Ease of use by convenient pipette access (patented design since 2011) Optimized gas exchange by product design Compatible to standard well-plates
Characteristics of Transwell Inserts 24 and 6.5 mm Transwell inserts Pore Size (µm) 0.4 0.4 3.0 3.0 5.0 8.0 8.0 Membrane PET PC PET PC PC PC PET Pore Density 4 x 106 1 x 108 2 x 106 2 x 106 4 x 105 1 x 105 1 x 105 Opacity Clear Translucent Clear Translucent Translucent Translucent Clear 1-well n n 6-well n n n n 12-well n n n n 24-well n n n n
Membrane Types Transwell permeable supports are available in three membrane materials: polycarbonate, polyester (PET), and collagen-coated polytetrafluoroethylene (PTFE). Polycarbonate Transwell inserts feature thin, translucent membranes available in four pore sizes ranging from 0.4 µm to 8.0 µm. Most are treated for optimal cell attachment.
Improves cell attachment leading to increased cell growth and yields Consistent and even cell attachment Clear, flat-bottom microplate inserts are treated with a patented Corning® CellBIND surface treatment for optimal cell attachment. Flat bottom microplates have a 360 µL total Related Products: 96 Well Tissue Culture Plates With Lid
3.0um pore micro insert. Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials Material: Glass for Insert, Polymer for feet Dimensions: 5x29mm,5x31mm/5.7x29mm
Features. Ease of use by convenient pipette access (patented design since 2011) Optimized gas exchange by product design. Compatible to standard well-plates. Industry leading quality standards to ensure membrane parameter consistency (important for consistent cell culture results) RNase/DNase Free and Non-pyrogenic.
A broad selection of membrane pore sizes, 0.4, 1.0, 3.0, and 8.0 µm diameter; Packed in individual blister packs, 48 inserts/case; Non-Tissue Culture-treated insert housings prevent promiscuous growth of cells on the insert walls; Innovative hanging design facilitates pipetting and allows for co-culture
Recommended Medium Insert Volume 0.1 mL Surface Treatment TC-Treated Sterile Yes Membrane Material Polyethylene terephthalate (PET) Membrane Pore Size 3 µm Nominal Pore Density 2x10⁶ pores per cm² Membrane Diameter 6.5 mm Lids Included Yes Packaging Format
6.5mm Transwell with 3.0um Pore Polyester Membrane Insert Sterile Code: 3472 D2-53 * 6.5 mm membrane diameter are packaged 12 inserts in a 24 well plate, 4 plates per case
Sterlitech polyester track etch (PETE) membrane filters, 3 micron pore size, 25 mm diameter, pack of 100. Hydrophilic, solvent resisant film for blood assays, microscopy, and highly caustic samples. SKU PET3025100 Manufacturer Sterlitech Pore Size 3.0 Diameter (mm) 25 Pack Size 100 $100.40 Quantity: Add to Cart Request A Quote
Track-etched PET membranes have a smooth surface and defined cylindrical pores that traverse the membrane Low protein binding PET membrane Sterilized by gamma irradiation A wide variety of configurations including 6, 12, and 24 well A broad selection of membrane pore sizes, 0.4, 1.0, 3.0, and 8.0 µm diameter Packed in individual blister packs, 48 inserts/case Non-Tissue Culture-treated insert housings prevent promiscuous growth of cells on the insert walls Innovative hanging design
Product No. Description. Pricing. PTSP24H48. Replacement for MCSP24H48, Polyethylene Terephthalate hanging cell culture insert with pore size of 3 μm used in a 24-well plate for cell attachment, cell culture, cell differentiation & ICC. Expand. Hide. Match Criteria: Product Name.
